Contezolid acefosamil sodium (Synonyms:MRX-4 sodium)
目录号 : KM12347 CAS No. : 1807365-35-0 纯度 : 98%

Contezolid acefosamil sodium (MRX-4) 是一种新型的恶唑烷酮,用于耐药革兰氏阳性菌引起的皮肤组织感染并发症 (cSSTI) 的抗生素。Contezolid acefosamil sodium (MRX-4) 可显著降低骨髓移植和单胺氧化酶抑制。

规格 价格 是否有货 数量
5mg
In-stock
10mg
In-stock
50mg 询价 In-stock
100mg 询价 In-stock

Other Forms of Rapamycin:

KKL Med 的所有产品和服务仅用于科学研究,不能被用于人体,兽医,我们也不向个人提供产品和服务。
生物活性

Contezolid acefosamil sodium (MRX-4), a new and orally active oxazolidinone, is an antibiotic in study for complicated skin and soft tissue infections (cSSTI) caused by resistant Gram-positive bacteria. Contezolid acefosamil sodium (MRX-4) markedly reduces potential for myelosuppression and monoamine oxidase inhibition (MAOI).

体外研究

Contezolid (MRX-I) is highly potent against all Grampositive clinical isolates of staphylococci, streptococci, and enterococci, including MDR organisms such as MRSA, methicilline-resistant Streptococcus epidermidis (MRSE), penicillin-resistant Streptococci (PRSP), and VRE.

体内研究

Oral absorption of Contezolid (MRX-I) occurrs rapidly in mouse, rat, and dog, with peak plasma concentrations observed at 0.5−2.6 h postdose. In mouse, rat, and dog, respectively, PK parameters are determined as follows: dose-normalized Cmax/dose was 524, 1065, and 259 ng/mL/(mg/kg); dose-normalized AUC0−t/dose was 1654, 3703, and 1664 ng•h/mL/(mg/kg); T1/2 is 1, 1.5, and 3 h; and the oral bioavailability is 69%, 109%, and 37%.
Contezolid (MRX-I) exhibits no obvious toxicity.
Contezolid (MRX-I, 100 mg/kg, once daily) significantly reduced the bacterial load in lungs compared to the untreated early and late controls.

Animal Model: BALB/c mice infected intranasally with M. tuberculosis Erdman.
Dosage: 100, 50 (twice), 25 (twice) mg/kg.
Administration: Gavage, once or twice daily, five days per week for four weeks.
Result: Significantly reduced the CFU recovered from the lungs compared to the early and late control mice (P < 0.05).
Twice daily MRX-I at 50mg/kg and 25 mg/kg were significantly better than the late control mice (P < 0.05).
Once daily MRX-I at 100 mg/kg was significantly better than twice daily 50 mg/kg and 25 mg/kg (P < 0.05). There was no statistical difference between twice daily 50 mg/kg of MRX-I and 25mg/kg (P > 0.05).
Animal Model: Rats.
Dosage: 20, 100, and 200/300 mg/kg/day.
Administration: Orally twice daily.
Result: No mortality was observed.
分子式
C20H17F3N4NaO8P
分子量
552.33
CAS号
1807365-35-0
运输条件

Room temperature in continental US; may vary elsewhere.

储存方式

-80°C, stored under nitrogen

溶解性数据
In Vitro: 

DMSO : 180 mg/mL (325.89 mM; Need ultrasonic)

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 1.8105 mL 9.0526 mL 18.1051 mL
5 mM 0.3621 mL 1.8105 mL 3.6210 mL
10 mM 0.1811 mL 0.9053 mL 1.8105 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months (stored under nitrogen)。-80°C 储存时,请在 6 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: 10% DMSO    40% PEG300    5% Tween-80    45% saline

    Solubility: ≥ 4.5 mg/mL (8.15 mM); Clear solution

    此方案可获得 ≥ 4.5 mg/mL (8.15 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 45.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

  • 2.

    请依序添加每种溶剂: 10% DMSO    90% (20% SBE-β-CD in saline)

    Solubility: ≥ 4.5 mg/mL (8.15 mM); Clear solution

    此方案可获得 ≥ 4.5 mg/mL (8.15 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 45.0 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。

  • 3.

    请依序添加每种溶剂: 10% DMSO    90% corn oil

    Solubility: ≥ 4.5 mg/mL (8.15 mM); Clear solution

    此方案可获得 ≥ 4.5 mg/mL (8.15 mM,饱和度未知) 的澄清溶液,此方案不适用于实验周期在半个月以上的实验。

    以 1 mL 工作液为例,取 100 μL 45.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。

The molarity calculator equation
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
The dilution calculator equation
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2