UMI-77
目录号 : KM18168 CAS No. : 518303-20-3 纯度 : 98%

UMI-77是一种选择性的 Mcl-1 抑制剂,对 Mcl-1 具有高亲和力 (IC50= 0.31 μM)。UMI-77 结到 Mcl-1 的 BH3 结合沟, Ki 值为 490 nM,比作用于 Bcl-2 家族其他成员的选择性高。

规格 价格 是否有货 数量
5mg
In-stock
10mg
In-stock
50mg
In-stock
100mg
In-stock
200mg 询价 In-stock
500mg 询价 In-stock

Other Forms of Rapamycin:

KKL Med 的所有产品和服务仅用于科学研究,不能被用于人体,兽医,我们也不向个人提供产品和服务。
生物活性

UMI-77 is a selective Mcl-1 inhibitor, which shows high binding affinity to Mcl-1 (IC50=0.31 μM). UMI-77 binds to the BH3 binding groove of Mcl-1 with Ki of 490 nM, showing selectivity over other members of anti-apoptotic Bcl-2 members.

体外研究

Competitive binding curve of UMI-77 against Mcl-1 is obtained by FP based binding assay using fluorescent labeled Bid BH3 peptide with an IC50 of 1.87±0.22 μM. UMI-77 potently inhibits the cell growth of BxPC-3 and Panc-1 cell lines with IC50 values of 3.4 μM and 4.4 μM respectively, and shows 3 to 5 times less potency in inhibition of the cell growth of two other tested cell lines MiaPaCa-2 (12.5 μM) and AsPC-1 (16.1 μM). The cell growth inhibition potency of UMI-77 correlates with the highest expression of Mcl-1 and Bak, and lowest expression of Bcl-xL in the sensitive cell lines, BxPC-3 and Panc-1. Capan-2 cells are showing similar sensitivity to UMI-77 (IC50 of 5.5 μM) as BxPC-3 and Panc-1, although has low Mcl-1 levels

体内研究

UMI-77 exhibits moderate metabolic stability with a half-life of 45 minutes.The maximum tolerated dose (MTD) of UMI-77 in SCID mice is determined. Administered 60 mg/kg i.v. for 5 consecutive days per week for two weeks does not cause any loss in the animal weight and there is no obvious sign of toxicity during the course of the treatment. Increasing the dose to 80 mg/kg show severe animal weight loss (>20%), therefore 60 mg/kg is used as a therapeutic dose for the in vivo efficacy studies. Daily treatment with UMI-77 for 5 consecutive days a week for two weeks results in statistically significant tumor growth inhibition by 65% and 56% in comparison with the controls in day 19 (p<0.0001) and day 22 (p<0.003) respectively

分子式
C18H14BrNO5S2
分子量
468.34
CAS号
518303-20-3
运输条件

Room temperature in continental US; may vary elsewhere.

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
溶解性数据
In Vitro: 

DMSO : ≥ 28 mg/mL (59.79 mM)

* "≥" means soluble, but saturation unknown.

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 2.1352 mL 10.6760 mL 21.3520 mL
5 mM 0.4270 mL 2.1352 mL 4.2704 mL
10 mM 0.2135 mL 1.0676 mL 2.1352 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: 10% DMSO    40% PEG300    5% Tween-80    45% saline

    Solubility: ≥ 2.5 mg/mL (5.34 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (5.34 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

  • 2.

    请依序添加每种溶剂: 10% DMSO    90% (20% SBE-β-CD in saline)

    Solubility: 2.5 mg/mL (5.34 mM); Suspended solution; Need ultrasonic

    此方案可获得 2.5 mg/mL (5.34 mM) 的均匀悬浊液,悬浊液可用于口服和腹腔注射。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。

The molarity calculator equation
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
The dilution calculator equation
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2